Make Almost Anything Drywall-Mountable.
Our secure wall anchoring solutions give you flexible mounting power. HangNailz offers anchoring solutions with high-bond adhesive strips for lighter-duty applications, as well as screw-in and construction adhesive options for for professional and heavier-duty needs.
Drywall Anchors Step-By-Step Installation
Step 1
Dampen a cloth with water or alcohol and wipe the flat side of the HangNailz™ Stick'um to remove any oils or protective coating.
Optional Step
Before sticking the item, warm the tape with a hairdryer for 15-30 seconds on high heat to activate bonding.
Step 2
Dry thoroughly, then apply adhesive strip to flat side, removing the adhesive backing.
Step 3
Apply vertically (arrow pointing down) at the same height to each side of frame. Hold for 30 seconds. Use caution while applying.
Step 4
Holding frame, support the prong using your index and middle finger as you press the V-Barb™ into the wall. Do NOT allow the prong to bend.
Step 5
Apply even pressure to both sides of frame. Slowly and steadily push the frame flush against the wall.
How To Use Stick'ums
Drywall Anchors Step-By-Step Removal & Touch-up
Step 1
To remove the frame, lift slightly while pulling away from wall until it finds the V·Barb exit point, then pull firmly away from the wall.
Step 2
Describe the main features of your brand or products using a few lines of text along with images or icons.
Step 3
Press your finger on the V·Barb
exit point to flatten.
Step 4
Then using a fingertip or a small brush, dab a small amount of matching paint into the exit point.
How To Remove'um
